[ROM] LOLLIPOP UPDATE STOCKROM FOR FLARE S3 OCTA (X330)

[ROM]LOLLIPOP UPDATE STOCKROM FOR FLARE S3 OCTA (X330)

This is update for Lollipop Stockrom flashable via Custom Recovery. First backup your phone. Then make sure you are in Stockrom v05. If not flash this rom via SPFT here.

 FLASH AT YOUR OWN RISK. ..

UPDATE: Click Here

SUPERUSER: Click Here

• make sure that you are in full stockrom v05
• use any custom recovery(cwm/twrp)
• flash the LOLLIPOP[X330].ZIP using custom recovery
• root by flashing the flashable superuser
• pray and reboot
• viola my rooted lollipop update kana

Credits:

Villacarlos Jay

Cherry Mobile Flare S3 Octa™

How to Upgrade your Cherry Mobile Flare S3 MINI to MITO ROM (Pure Lollipop )

How to Upgrade your Cherry Mobile Flare S3 MINI to MITO ROM (Pure Lollipop ) Using PC or Laptop 

Requirements:

PC

USB CORD

Download all:

ROM Link : Click Here

Patch_Lolipop_sc8830_ram512.zip

UPGRADEDOWNLOAD_R2.9.9015.zip

Spreadtrum Driver

Bugs : Camera at the back.

            Front Cam Ok. 

            Just use Photo Editor  

Procedure:

How to INSTALL/FLASH? 

1. Extract all Needed Files using 7Zip or WinRAR

2. Install Spreadtrum Drivers 

3. Open Spreadtrum Upgrade Tool

4. Press the First Gear Button

5. Browse and Select the “ MITO PAC FILES “ wait to finish Load of Pac Files , You can see at the left  look like charging. Wait to finish, then Proceed to Step 6

6. Go to Patch lollipop and Delete Recovery img.

7.Copy all remaining Files after deleting Recovery img .

8.Then Paste in “Download Upgrade Tool Folder at the last part of this Folder “

9. Press the Play or Arrow Button

10. Take the Battery out of your Phone for atleast 15 secs. Place it Back and Plugin the USB while Simultaneously Holding VOL. DOWN and VOL.UP Button

11. Research Download Started Flashing. Release the buttons when flashing start, When its Finished Press Stop button and VIOLA!

Note: If Failed in Cache” Go to folder of upgrade tool find  upgradedownload.ini right click then edit... find CanEdit and CanSelect change 1  then open upgrade tool load  pac file then click  Gear Icon  and uncheck  cache  , then Flash again. That's it!

Credits :

Raymond Perez 

Klark Luis Fajardo Peralta

How To Port Lollipop Based ROMs for MTK Kitkat Devices

How To Port Lollipop Based ROMs for MTK Kitkat Devices

Only For Mediatek SOCs

This guide applies to same chipsets:

Example:
MT6577 to MT6577
MT6592 to MT6592
MT6572 to MT6572
MT6582 to MT6582

And works also for different SOC with same GPU


Before starting this tutorial, please make a backup of your ROM
I am not responsible for any damage to your device, this guide is for expert users.

You Need:

- Winrar, 7-Zip or similar
- Notepad++
- Tool for unpack/repack MTK boot.imgs
- Your Stock KitKat ROM
- One Lollipop ROM for port
- Brain 



Step 1.- Unzip the port lollipop ROM and also the Stock ROM. Rename the lollipop ROM folder to Port ROM



Step 2.- Delete this files or folders in Port ROM folder and replace with your files from Stock ROM:

Code:

-system/etc/firmware  <-- Folder
-system/lib/modules*  <--- Folder
-system/usr/keylayout/Generic.kl  <--- File

* In some ROMs this folder doesnt' exist

Step 3.-Open system/lib/hw folder in Stock ROM folder, then select & copy all files and paste to inside the system/lib/hw folder in Port ROM replacing files.

Note: if you porting a ROM from a different SOC, delete this files before in port rom, like this: audio.primary.mt65xx.so, audio_policy.mt65xx.so, gralloc.mt65xx.so, hwcomposer.mt65xx.so, ligths.mt65xx.so, sensors.mt65xx.so etc.


Step 4.-Rename your stock kitkat boot.img to stockboot.img and the boot.img from Port ROM folder to portboot.img. Now unpack the boot.imgs, in ramdisk folder from decompiled portboot.img open the fstab (ramdisk/fstab or fstab.mt65xx) file with Notepad++ and edit (compare with the fstab.mt65xx of your decompiled stockboot.img) and save. Use the kernel 3.4.67(zImage)from your decompiled stockboot.img and the ramdisk folder from decompiled portboot.img, recompile it and put this new boot.img in Port ROM folder.




Step 5.- Open the updater-script in META-INF from port rom, open it with Netepad++. Edit the format &mount points(compare with your updater-script from stock META-INF)

Example:

Code:

format("ext4", "EMMC", "/dev/block/mmcblk0p7", "0", "/system");
format("ext4", "EMMC", "/dev/block/mmcblk0p5", "0", "/data");
mount("ext4", "EMMC", "/dev/block/mmcblk0p7", "/system");

Step 6.- Zip the Port ROM folder and flash it in recovery mode and enjoy.

Fixing Bugs

No audio in loudspeaker?

Replace libaudio.primary.default.so from stock ROM to Port

Storage Bug

Decompile the framework-res.apk, go to res/xm/storage_list.xml and edit it like the storage_list.xml from framework-res.apk of your Kitkat ROM, also edit the fstab.mt65xx in boot.img(compare with the fstab.mt65xx of your kitkat boot.img)

Bluetooth

Replace libbluetooth_mtk.so and libbluetoothem_mtk.so from stock ROM to port.

Sensors

Replace libsensors.so file from stock ROM to port.

Wifi

Replace libwifi-service.so from stock ROM to port


Camera

all files that start with libcam....so

Credits:

ZonaMRM

XDA

Original Source