Sunday, February 14, 2016

How to fix Low Signal for My28 and My28s & Unlocking/Openlining via Terminal Method using Phone

NOTE: APPLICABLE ETO SA MGA NAKAPAG OPENLINE USING FIRMWARE AT PWEDE DIN ETO GAWIN PANG OPENLINE.


myphone My28 openline

  • DO THIS AT YOUR OWN RISK 

NOTE: YOU MUST ROOT YOUR DEVICE BEFORE DOING THIS, USE KINGROOT.

  • Bago ang lahat, mag-backup muna ng inyong IMEI. Just in case na mabago ang IMEI niyo.
 1. Open Dialer and dial this codes *#*#83781#*#* (Engineer Mode)2. Go to Telephony --> Set IMEI3. Copy your Sim1 and Sim2 IMEI on a piece of paper. (Kung nagbago yung IMEI niyo at nawala yung box, pwede niyo din e check yung default IMEI niyo sa likod ng phone, tanggalin lang ang battery at makikita niyo yung IMEI ng Sim1 and Sim2)  


=========================================================

  • REQUIREMENTS
  1. Terminal Emulator (download on Playstore)
  2. FIX OPENLINE.rar
  3. Common Sense
  • After downloading FIX OPENLINE.rar, extract it using RAR, 7zip, etc.. 
  • Open the extracted folder and you can see, wcnfixnv1.imgwcnfixnv2.imgwfixnv1.imgwfixnv2.img.
  • Copy those 4 files and put it in the root of your SD Card. (Wag niyo silang ilagay sa kahit anong folder, MALIWANAG?)


=========================================================

FOLLOW THIS SIMPLE STEPS (COMMON SENSE BARELY NEEDED)
  1. Open Terminal Emulator
  2. Type su (after press enter may lalabas na "#" sign)
  3. Type ( dd if=sdcard/wfixnv1.img of=dev/block/mmcblk0p5 ) tapos enter, may lalabas na message at babalik yung "#" sign 
    Terminal emulator step 2 and 3
  4. Type ( dd if=sdcard/wfixnv2.img of=dev/block/mmcblk0p6 ) tapos enter, may lalabas na message at babalik yung "#" sign
    Terminal emulator step 4
  5. Type ( dd if=sdcard/wcnfixnv1.img of=dev/block/mmcblk0p10) tapos enter, may lalabas na message at babalik yung "#" sign
    Terminal emulator step 5
  6. Type ( dd if=sdcard/wcnfixnv2.img of=dev/block/mmcblk0p11) tapos enter, may lalabas na message at babalik yung "#" sign
    Terminal emulator step 6 and 7
  7. Type ( reboot ) tapos enter para mag reboot yung device.


  8. Check your IMEI
  8.1 Open Dialer and dial this codes *#06#
Kung nabago ang inyong IMEI, then Go back to Engineer Mode and restore your original IMEI


NOTE: APPLICABLE ETO SA MGA NAKAPAG OPENLINE USING FIRMWARE AT PWEDE DIN ETO GAWIN PANG OPENLINE.


HIT LIKE & THANKS :D



#Team28Devs

Credits:
MyPhone My28 & MyPhone My28s (OFFICIAL GROUP)



No comments:

Post a Comment