UPGRADING COOLPAD 8295M, 8295 AND HOW TO BYPASS C.P.B INVALID OR EXTRACTION ERRORS ON YGDP TOOL

 BYPASSING ERRORS WHEN UPGRADING OR HANDLING OF MOST COOLPAD CPB 

STOCK ROM

The coolpad 8295m with mediatek processor and chipset is one of the devices that give out errors when it is being updated wrongly or in an unsupported environment which could make the user or the updater of the device to think the situation is out of hand because the errors can only solved with the use of proper observations and steps. The steps mentioned above would be the needed expertise that would lead to a successful operation in the task at hand. Since the coolpad 8295m and 8295 comes with and is powered by a mediatek processor, the Rom to be flashed on the device should be in the form of scatter related firmware but unfortunately the Rom is only flash-able with the use of CPB extraction software called YGDP tool as the Rom comes in CPB format in default so there is need for the use of an adequate and capable and as well corresponding tool made solely for the updating of coolpad devices with mediatek (CPU) this tool is normally called YGDP tool.

Updating Coolpad 8295m, Coolpad 8295 without Errors

Below are the necessary steps to take to successfully flash or update the 8295m Android device without annoying errors of (invalid CPB file) which come out as error warning most times.

a. Make use of a very strong and reliable USB cables to have a stable connection between PC and USB

b. Install correct and appropriate MediaTek driver since the device has (MTK) chipset

c. Make sure device is powered off and give it some minutes to fully power down

d. Open XGDP tool make use of the latest ( as it shows no extraction) errors hence it is more ideal and more recently patched

Navigate to the ( config ) segment of the tool and load the CPB file wait for the extraction to complete, after the process complete, navigate to the “C Drive” then open the YGDP folder which should be at the bottom of the drive then open the (download folders) which should be numerous in number from henceforth the firmware for the coolpad 8295m could be seen in scatter format hence the need or use of flash tool could be effectively employed.

Make use of SP Flash tool for the operation because the firmware has been extracted. Flash the device normally and wait for the first boot.

furthermore in the case of facing constant extraction errors when dealing with the extraction or loading of the normall firmware of a coolpad device it may be helpfull to use various version of YGDP TOOL .

find scatter after extraction

TO FIND SCATTER FILE AFter extraction open YGDP folder open all download folders listed in inside search and find scatter file after extraction done accurate