A GUIDE TO SUCCESFULLY UPDATING THE TECNO DROID 7C DROID 7CS DROID 7C PRO TABLETS
The tecno 7C droid series and family chain has many eye catching features and designs as altogether which puts them out and stand in the comparising and characteristics with similar devices and as well its software design which is very elegant beautiful and has high programming endowment hence it normally comes with the [Lollipop Android system] putting the end user to the treath of experiencing high quality and highly efficient Android system. The flashing or updating of the tecno droid tablet normally happen in occasions of some software issues which may arise on its own or its induced by the user of the device.
Display issues after flashing network issues [invalid IMEI]
Poor network signal issue battery quick drain or low battery life
Distorted screen resulting issues occasional rebooting and hanging theft code issue (change of sim)
Upgrading Tecno droid 7C 7CS 7CPRO
Below are illustration of the procedure to upgrade the droid Tecno tablets without any much hassle or flaw:-
- make sure software to be flashed when loaded in the flash tool that all needed partitions and regions are well displayed.
- Make sure the scatter file contains the necessary partition listed in the firmware folder in its internal code when edited if not so consider editing or modifying the scatter or downloading another firmware that will ensure all regions are listed in the tool when executed
- Make sure battery level is above 30% before the upgrade process begin to avoid a possibility of having a tablet with dead bootloader at the end of the operation.
- Power down the device and connect the tablet to the pc and wait for pc detection then the flashing operation would start by automated process
Tecno 7C (Tecno-7C-P121-A1-L)
Tecno 7CS (Tecno-7CS-P121-B1-L-KE-Safaricom)
Tecno 7C Pro ( China miracle Box Backup Dump)
No comments:
Post a Comment